Error Code 0x000007b is one of the most common and annoying errors that users most often face these days, especially when they are trying to access some game or latest application. When 0x000007b error occurs the screen shows The application was unable to start correctly (0x000007b). Click OK to close the application.
The primary reason behind 0x000007b error might be an absence or damage of some system inside your computer, or the application you are trying to open can also be corrupted. Anyway, the most common cause for 0x000007b error is problems with NVIDIA drivers or conflict between a 32-bit application and 64-bit system.
- 1 How to Fix Windows Application Error 0x000007b in Windows 10, 8 and 7
- 1.1 Method 1 – Update DirectX
- 1.2 Method 2 – Run the Program As Administrator
- 1.3 Method 3 – Reinstall Your Application
- 1.4 Method 4 – Update .NET Framework
- 1.5 Method 5 – Update DLL
- 1.6 Method 6 – Reinstall the Affected Application
- 1.7 Method 7 – Uninstall and then Reinstall the Microsoft Visual C++ Redistributable.
- 1.8 Method 8 – Run CHKDSK to Scan Your Computer’s Hard Drive
- 2 Conclusion
How to Fix Windows Application Error 0x000007b in Windows 10, 8 and 7
However, no matter what is the reason behind Error code 0x000007b. It can always be fixed by simply following few methods which we are going to share with you. So, let us discuss the methods to fix 0x000007b error code in Windows.
Method 1 – Update DirectX
If none of the method mentioned so far works you can try updating/reinstalling DirectX. Now, you must know that this method is your last option if the error still occurs, then you might need to re-install your Windows.
Step 1: You can use this link to update/reinstall DirectX on your computer.
Step 2: Next, download the file and set it up by following the on-screen step that appears.
Step 3: Once done, reboot your computer and check if 0x000007b error is fixed or not.
- Microsoft Compatibility Telemetry High Disk Usage
- DNS_Probe_Finished_No_Internet Error
- Windows Has Detected An IP Address Conflict Issue
- WLDCore.dll is Missing Error in Windows
Method 2 – Run the Program As Administrator
The most common method to fix 0x000007b error is to try to run the application or the program as an administrator because sometimes the error can be caused if there is non-availability of administrative privileges.
Step 1: Start your computer and then Right-Click on the Application You Want to Run.
Step 2: Next, a pop-up menu will appear, from that Select Run as Administrator Option > Click Yes.
Afterwards, run the application again and see if it’s running smoothly or still showing an 0x000007b error.
Method 3 – Reinstall Your Application
This is another one of the simple and helpful methods you can use to fix this issue. You can re-install your application by following the steps given below:
Step 1: Start your computer and Go To the Control Panel.
Step 2: Then, in the control panel window Select Program & Features > Select Your Application.
Step 3: Right-click On the Application > click on the Uninstall Option.
Step 4: Restart your computer and then Reinstall Your Application from the original disk/image & run the application.
Note: During re-installation turn off your antivirus.
Method 4 – Update .NET Framework
Sometimes the error might be caused if your computer’s .NET Framework is outdated, so updating .NET Framework of your computer might help you to fix 0x000007b issue.
Step 1: Start your computer and open the run dialog box by pressing Windows Key + R key combination > type Control Panel and hit enter.
Step 2: In the control panel window Select Programs & Features.
Step 3: In the Programs & Features window Single Click on Every Item Starting With “Microsoft.NET.”
Step 4: Next, Click on the Uninstall > Go to “Microsoft .NET Framework Download Website to download and install the latest version of the framework.
Method 5 – Update DLL
This method is a bit complicated, but it can surely help you to fix the error 0x000007b, this can be done by using the following steps:
Step 1: First of all, download 32-bit xinput1_3 dll, then use a compression tool to extract the files.
(note: before you perform this step remember to back up the original xinput1_3 dll, you can locate it at C:\Windows\SysWOW64.)
Step 2: Next, copy the file extracted from the downloads to C:\Windows\SysWOW64 and paste it here.
Step 3: You can select Copy and Replace.
Method 6 – Reinstall the Affected Application
Sometimes, the application you are running can be at fault. If the application you want to run is not installed successfully or if it is corrupted, then it might show 0x000007b error.
Thus, you might need to reinstall the application successfully; then it might run smoothly.
Follow the steps given below.
Step 1: Start your computer and then Go to Control Panel.
Step 2: Then, in the control panel window, Select Programs > Select Programs and Features.
Step 3: Next, you will be redirected to the Programs and Features window, select the option “Uninstall a program.”
Step 4: Then, Search the Affected Application and Right-Click on It > Click on Uninstall.
Step 5: Next, navigate through the un-installation wizard > Uninstall the application and wait for some time.
Step 6: Once, the uninstalling is done, Restart Your Computer > Reinstall the Affected Application.
Step 7: After performing all the steps mentioned above, run the reinstalled application and check whether the error is fixed or not.
Method 7 – Uninstall and then Reinstall the Microsoft Visual C++ Redistributable.
If the issue is caused by a problem-related to Microsoft Visual C++, then you will need to uninstall and then reinstall the Microsoft Visual C++ Redistributable.
The following steps will help you to perform this function:
Step 1: Turn on your computer and then go to the Control Panel and from there go to the Programs > Programs & Features.
Step 2: In the programs & features window, select Uninstall a Program option, and then look for the application or program that you want to uninstall.
Step 3: Once you have located Microsoft Visual C++ Redistributable and right-click on it.
Step 4: Next, uninstall the Microsoft Visual C++ from the un-installation wizard also > then restart your computer.
Step 5: Afterwards, download the installer of Microsoft Visual C++ based on your computer’s operating system.
Step 6: Last thing you need to do is install the best-suited version of Microsoft Visual C++ for your computer, by running and going through the installer you have downloaded > then restart your computer.
Method 8 – Run CHKDSK to Scan Your Computer’s Hard Drive
Okay so here is the last but not the least method, which you can always use if none o =f the other methods work for you. The following steps will help you:
Step 1: Turn on your computer and then Navigate to the “Start Menu.
Step 2: Next, in the search bar type “cmd” and hit the enter button.
Step 3: Then right-click on the result titled as cmd and from the pop-up menu that appears Select Run as Administrator.
Step 4: Then, you will be redirected to Elevated Command Prompt window > type “chkdsk/f/r” and hit Enter.
Step 5: After you press Enter button, a check-box will appear asking you if you want to schedule a scan on your computer next time you switch it on or not; Type Y to confirm it.
Step 6: Finally, restart your computer and wait for some time to let the scan of the computer’s Hard drive to complete and reboot it.
- Modern Setup Host Has Stopped Working in Windows 10
- What is IDP.Generic Virus Warning
- WOW51900319 Error in World of Warcraft
- Default Gateway is Not Available Error
- Error 0x80070035 – The Network Path was Not Found
So, these methods listed in this article to fix the Windows Application Error 0x000007b are the most helpful and tested ones. However, you will have to be really careful while performing the methods and follow them step-wise otherwise, and it can lead to the development of more problems on your computer.