If your WIFI does not have a valid IP configuration and you are looking at how to fix that, you have come to the right place as in this article we are going to tell you how to fix this problem in some easy steps. This problem usually occurs at any time without any alert. Sometimes this error pops up after troubleshooting the network problem.
On the other hand, it can happen as soon as you open your computer. If the issue is happening to every device connected to the network, then the issue is with the router and not in the system, but if this problem is only happening in your device, you should proceed to use these steps to fix this issue. But first of all, try updating your windows system. Maybe it is resolved in the update.
Contents
How To WIFI Doesn’t Have a Valid IP Configuration
This error can occur for a variety of causes. It could be because the system is not getting the IP address or some problem in the connection that could be blocked because of malware or issues in the driver. As this problem has many issues it also has many solutions to it as well. All of the solutions are given below in easy steps. But before proceeding, you should restart your system once.
1. Do a Clean Reboot
Doing a Clean Reboot might help you in solving this problem as it will clean all the configurations and it will boot into a clean state. The steps for doing this are-
Step 1: First you need to open the run command by holding “windows key” and “r”.Now open system configurations by typing “MSConfig” then clicking “ok”.Now click on the “Services” Tab.Tick the “Hide all Microsoft services” in the left corner.
Step 2: Then click on “Disable all” on the right side.Click on “Apply” then “Ok”.Now open Task manager by clicking on the windows button and searching “Task Manager”.
Step 3: Disable all the currently running applications by clicking on “Disable”.Close the Task Manager.Now restart your System and it will restart into a clean boot state.
2. Update Drivers
You can try to download or update drivers or either delete the drivers that are causing the IP address issue in the system. Now, these are some easy steps for updating drivers.
Step 1: First, you need to open the run command by holding “windows key” and “r”.Now search for “devmgmmt.ssc” and click “ok”.Now click on “Network adapters”.Double click on your network card.Now select “Update Driver”.
Step 2: Now click on “Search automatically for updated driver software and follow the instructions given.Now you’ve updated your drivers.See if it resolves the problem.
3. Rollback Drivers
Rollback means installing the previous version of drivers that could happen to be more stable and secure. This method is used to avert any issues that are happening with the currently installed drivers. Here are some easy steps to do it.
Step 1: First you need to open the run command by holding “windows key” and “r”.Now search for “devmgmmt.ssc” and click “ok”.
Step 2: Now click on “Network adapters”.Double click on your network card.Now select “Driver” and see it has the option to “rollback driver”.
If the option cannot be clicked or greyed out, your driver cannot be rolled back.
4. Uninstall Drivers
If you cannot roll back the driver you can try and delete it temporarily to see if it works after that or not. If you uninstall the drivers and restart your system, Windows automatically install the drivers that it needs and is most compatible with. Windows comes with some pre-installed drivers that are necessary for its functioning. These are some easy steps to uninstall your drivers from the system.
Step 1: First you need to open the run command by holding “windows key” and “r”.Now search for “devmgmmt.ssc” and click “ok”.Now click on “Network adapters”.Double click on your network card.
Step 2: Now select “Uninstall” and then “ok”.Follow any additional guidelines.Now you’ve successfully uninstalled the drivers.Restart your system to see if it works out or not.
5. Disable Or Uninstall Antivirus
Any third-party anti-virus can also cause this problem, so uninstalling or temporarily disabling it might help in preventing the problem to occur. These are some easy steps for disabling or uninstalling the anti-virus.Open your anti-virus app and then find the settings option in the app.Now find the disable option and click on it.
How to uninstall-
Step 1: First you need to open the run command by holding “windows key” and “r”.Now search for “appwiz.cpl” and click “ok”.
Step 2: Now click on your Anti-virus application.Now click on uninstall.
See if these steps resolve the problem or not. If it does not resolve your problem you can re-install your application to protect your apps and files.
6. Restore Windows Firewall To its Default Settings
Restoring your windows firewall into its default settings can solve this problem because it will put the configurations of the firewall to its default and this method helped a few users so it can probably help you too. These are some easy steps on how to do it-
Step 1: First you need to open the run command by holding “windows key” and “r”.
Step 2: Now search for “firewall.cpl” and click “ok”.Now select “Restore Defaults”Click on the “Restore” button and click yes.
See if this resolves the issue or not.
7. Releasing And Renewing IP Address
Releasing and renewing your IP Address can be a good method for preventing this problem. Follow these steps on how to do it.
Step 1: First you need to open the run command by holding “windows key” and “r”.Now search for “cmd” and then click “ok”.Now right-click and select “Run as administrator”.
Step 2: Now type in “ipconfig /release” and press Enter.Now type in “ipconfig/renew” and press Enter.Now type “Exit” and press Enter.
See if it resolves the problem or not.
8. Reset TCP/IP Stack
Resetting the TCP/IP Stack can be found useful as well in preventing this problem to occur as many users have solved this problem using this method. There will be only 3 commands you will need to run. These are used to reset the entries of windsocks and then rewrite the registry keys that are used by the TCP/IP. These are some easy steps on how to do it.
Step 1: First, you need to open the run command by holding “windows key” and “r”.Now search for “cmd” and then click “ok”.Now, right-click and select “Run as administrator”.Now type in “netsh Winsock reset catalog” and press Enter.
Step 2: Now type in “netsh int ipv4 reset reset.log” and press Enter.Now type in “netsh int ipv6 reset reset.log” and press Enter.After running all three commands you should restart your system.
Check whether it is resolved or not.
Conclusion
In this article we learned about how to fix the Wifi doesn’t have a valid IP Address Problem which is very common to occur. One of the above mentioned methods will surely fix your problem and you will see that your wifi will have a valid IP configuration if you use one of the methods.