Driver Power State Failure is a rare blue screen problem that occurs when a driver enters sleep mode while you are working. When the computer wakes up from hibernation, the BSOD frequently appears because Windows is unable to wake up the device driver or the driver takes too long to respond.

Simple changes to the power settings can fix the problem, but some users may need to dig deeper to find a solution. On Windows 10, there are six ways to fix the Driver Power State Failure problem.

An incompatible driver is the most prevalent cause of Driver Power State Failure, which is a Blue Screen of Death problem. Install the best software to solve these issues to avoid the anguish of the Blue Screen of Death.

Error
Error

You can either restart the computer or use one of the solutions given below, depending on what caused the problem. When Windows users see the Blue Screen of Death, they normally panic, but in this situation, there are some simple steps you may do to fix the Driver Power State Failure in Windows 10.

So, if you’re looking for a simple fix for this issue, check out the tutorial below.In 99 percent of circumstances, placing your operating system into sleep mode causes driver power state failure. This problem message will almost likely appear when you try to log in to the device.

 

The issue is causeed by the power settings or incompatibility issues with some of the system’s drivers. Driver Power State Failure can result in a range of problems on your computer, with users reporting the following issues:

Driver Power State Failure Stop Code – This is a common BSoD issue when operating your computer. The driver’s power state has failed. Microsoft’s operating system, Windows 10, is the most recent version. This issue has been reported by numerous HP, Dell, and Lenovo users, and it affects nearly all devices, including Toshiba, HP, Dell, Acer, Alienware, Samsung, Sony, and Lenovo.

Nvidia Driver Power State Failure – Your Nvidia graphics card is frequently to blame for this issue. If you have an Nvidia graphics card, try out some of our suggestions. Failure of the driver’s power state This issue can happen when you use a specific USB device. To resolve the issue, you may need to unplug all USB devices and search for the one that is causing the issue.

Driver Power State Failure on Startup or Boot – According to customers, this problem might happen when your computer is powering up. If this problem happens at startup, you will be unable to use your computer. The driver’s power state has failed. Photoshop, Autocad – This problem can occur in a variety of apps, and some individuals have experienced it when using Photoshop or Autocad.

Failure of the driver’s power status, whether it’s a solid-state drive (SSD) or a hard disc drive (HDD) This issue can sometimes be caused by a new hard drive or SSD. If this happens, you’ll want to make sure your drivers are up to current and that everything is working properly.

The driver’s power state has failed. McAfee and Kaspersky — While third-party applications are often to blame, your antivirus software can also be to blame. According to users, this issue is more widespread with Kaspersky or McAfee.The Driver Power State Failure blue screen – 0x0000009f error screen usually appears on startup due to a driver-related issue. The problem has been fixed by Microsoft in update file KB 2983336.

The driver’s power state has failed. ntoskrnl.exe – ntoskrnl.exe is an application that may be used to display the name of the file causing the error in this error message. According to users, the most common cause of this issue is ntoskrnl.exe.

How To Fix Driver Power State Failure in Windows 10

Here is the solutions.

Solution 1: Enter Safe Mode 

While updating a device driver is usually the most effective approach to get new bug fixes, the newer driver may contain problems that cause this problem. If this is the case, you’ll need to revert to the previous functional version of the driver.

To successfully roll back your drivers, you may need to restart Windows in Safe Mode first. To begin, pick Device Manager from the Start menu by right-clicking it.

Step 1: Find and select the driver that you believe is generating the BSOD problem from the Device Manager window’s list. This is most likely a gadget that was just installed or upgraded. Check your BSOD dump logs for extra information if you’re unsure. When you’ve found the device, right-click it and choose Properties from the menu.

Step 2: In the Properties window, click the Driver tab, then the Roll Back Driver option. You’ll be prompted by Windows to confirm why you’re resetting the device. Choose one of the acceptable alternatives, then confirm by selecting Yes.

Step 3: Windows will uninstall the problematic driver and reinstall the most recent driver. However, before you restart your PC, you can help to avoid this BSOD issue from happening again by turning off your device’s power-saving mode. Select the Power Management tab if it’s present, and uncheck the Allow the computer to turn off this device to save power checkbox.

Step 4: To save your settings, select OK. After you’ve rolled back the device driver, restart your PC by right-clicking the Start menu and selecting Shut down or sign out > Restart.

Solution 2: Update Your Drivers

Failure of the driver’s power status A issue with the installed device drivers is the most common cause of BSOD. Unless your device is set to automatically install new driver updates, you may need to manually install new drivers. This is normally done using Windows Update, which will look for (and install) any appropriate drivers for your computer.

Step 1: Right-click the Start menu and select Settings to check for new driver updates using Windows Update. If drivers are available, go to Settings > Update & Security > Download or Download and Install. If Windows does not immediately search for drivers, choose Check for Updates first.

Step 2: While most device drivers are available through Windows Update, you may need to manually download and install drivers from the manufacturer’s website. When compared to the drivers accessible through Windows Update, NVIDIA graphics drivers are significantly newer on the NVIDIA website.

Step 3: Similarly, certain chipset drivers for internal motherboard components (such as built-in WiFi) may necessitate downloading the drivers from the manufacturer, particularly if you’ve constructed your own PC.

Solution 3: Perform an SFC Scan

Step 1: Press Windows Key + X to access the Win + X menu, then select Command Prompt (Admin) from the list. If Command Prompt isn’t available, use PowerShell instead (Admin).

Step 2: Type sfc /scannow into Command Prompt and press Enter to run it. The scanning process will now begin. Because the SFC scan can take up to 10 minutes, don’t interrupt it.

If you can’t execute an SFC scan or if the scan can’t fix the problem, users recommend using DISM scan instead. To do so, follow these steps:

Run Command Prompt as an administrator. Run the following commands:

DISM.exe /Online /Cleanup-image /scanhealth
DISM.exe /Online /Cleanup-image /Restorehealth

After running both instructions, check to see if the problem has been resolved.

If you weren’t able to execute the SFC scan before, do it when the DISM scan is completed. After running both scans, the issue should be completely addressed, and the error message should no longer appear. You might be able to fix the Driver Power State Failure warning by using the procedures listed above.

Solution 4: Change Your Power Settings

Step 1. Press Windows Key + S to open the control panel. From the drop-down menu, choose Control Panel. When the Control Panel displays, look for Power Options and pick it. Select the function of the power button by clicking on it.

Step 2. From the drop-down option, select Change settings that are now inaccessible. Disable Turn off the quick start (recommended), sleep, and hibernation options. Click the Save button to save your changes.

Step 3. Driver Power State Failure on Dell devices may occur as a result of your power settings. Users believe that eliminating specific power settings, such as the ones we showed you above, may be sufficient to resolve the issue.

Solution 5: Change Your Power Plan Settings

Step 1: Select Power Options from the Control Panel. Change plan settings can be found under the currently selected power plan. Then select Change advanced power settings from the drop-down menu.

Step 2: Expand the Sleep section and change all of the options to Never.  Go to PCI Express and Wireless Adapter Settings. Expand all choices and set them to Never.

Conclusion

After that, the problem should be completely resolved. Keep in mind that this feature is supported by a number of devices on your computer, so you’ll need to disable it for all of them.The Windows Driver Power State Failure problem could be caused by your power settings. Many electronics can be turned off to save energy, however this decision can sometimes cause this problem.