Default Radeon Wattman Settings have been Restored Due to Unexpected System Failure

This is a graphics-related issue that affects users of PCs with AMD Radeon cards installed. The issue can arise in a variety of situations, but it typically does so following a game-related driver mishap. Sometimes the notice shows immediately following a game crash or restart.

Despite the fact that the issue is still relatively fresh, useful solutions have already been proposed. We have compiled the solutions that have worked for other people in an article. I wish you success in solving your issue!

Default Radeon Wattman Settings have been Restored Due to Unexpected System Failure


What Leads to the Windows Error “Default Radeon WattMan Settings Have been Restored due to Unexpected System Failure”?

This is a peculiar issue. Over the past few years, it has been a problem for numerous users all over the world, although numerous potential causes have not been identified. Although eliminating this error is fairly challenging, certain causes can be identified. Look at them below:

  • Fast startup is a Power Options setting that allows users to boot up more quickly while skipping the loading of some components. Errors like the one in this article may be caused by components that fail to load during boot.
  • outdated graphics software The error message is associated with the AMD Radeon driver crash, thus it would be a good idea to see if an updated version is available to address this issue.
  • Overclocking problems Some customers claim that the issue vanished once they stopped overclocking their GPUs. They also said that, aside from Radeon WattMan, all overclocking software had to be fully uninstalled because it was evident that it was the cause of the instability.

Solution 1: Turn Off Fast Startup

Your computer’s Power Options are a good location to start looking for the source of the error because they contain a Fast startup option that makes your machine boot up more quickly.

It’s conceivable that this setting inhibits your computer from correctly loading your graphics card driver. To disable Fast startup, adhere to the procedures below!

  1. Open Control Panel by typing the utility’s name into the Start button’s search box or by selecting the Search (Cortana) button on your taskbar’s left side (at the bottom left of your screen).
  2. You can also launch Control Panel directly by pressing Windows Key + R, where you should input “control.exe” and then click Run.
  3. Change the Control Panel’s View by setting to Small Icons and look for the Power options.
  4. Open it and look to the window’s top, where you should see the option to “Change settings that are temporarily unavailable.” Navigate to the Shutdown settings at the bottom of the window by clicking on it.
  5. The “Turn on fast startup (recommended)” option’s checkbox should be unchecked. Check to see whether Radeon Wattman’s error notice still appears after clicking the Save Changes button in the window’s bottom right corner.

Solution 2: Update Your Drivers.

Installing the most recent drivers may put an end to your drama and restore stability to your setup, as is the case with many different graphics-related issues.

If you attempt to play some of the most recent games while using out-of-date drivers, instability problems are frequently seen. Installing the most recent AMD Radeon drivers on your computer requires that you adhere to the steps listed below.

  1. To find Device Manager in the list of search results, click the Start menu button, type “Device Manager” into the search box, and then click the first result to choose it. The Run box can also be opened by pressing the Windows Key + R key combination. To launch it, enter “devmgmt.msc” in the box and select OK.
  2. Expand the Display Adapters section, right-click on your AMD Radeon card, and select Uninstall Device since you want to upgrade the graphics driver on your computer.
  3. Confirm any dialogues or prompts requesting your approval to remove the existing AMD Radeon driver, then wait for the removal to finish.
  4. Check the AMD website to find the driver for your graphics device. Enter the necessary card and operating system details, then click “Submit.”
  5. A list of all accessible drivers ought to show up. Scroll down until you find the necessary entry, then click its name and the Download button. You can install it by saving it to your computer, opening it, and following the on-screen directions. To see if the error message “Default Radeon WattMan settings have been restored due to unexpected system failure” is still present, check!

Solution 3: Stop Overclocking Your GPU.

When consumers overclock their GPUs, the error frequently manifests. By increasing the graphics processor’s maximum frequency above the value established by the manufacturer of your GPU, this procedure is known as overclocking. This can enhance your PC in every aspect and offer it a substantial performance and speed edge when playing video games.

Depending on the software you first used to overclock your processor, you may be able to reset its frequency. Stop overclocking your GPU and observe whether the problem still exists.

Solution 4: Remove any Overclocking Software from Your Computer

Since the Radeon WattMan is an overclocking tool among other things, customers have reported that uninstalling other overclocking tools while retaining Radeon WattMan manages to address the issue. Before using this technique, make sure you stopped overclocking your GPU by following the recommendations in Solution 3!

  1. As you won’t be able to uninstall apps using any other account rights, first check that you are logged in with an admin account.
  2. It’s possible that you will have to undo any GPU modifications you have made using any of the tools you are about to uninstall.
  3. Locate Control Panel using the Start menu by clicking on it and selecting it. If you are using Windows 10, you may also click the cog symbol to access Settings.
  4. Click on Uninstall a Program in the Programs section of the Control Panel by choosing View as: Category in the upper right corner.
  5. Clicking on Apps in the Settings app should open a list of all installed programmes on your PC right away.
  6. Find every installed overclocking tool on the list and follow the same procedure for each one. Click the Uninstall button above the list after selecting each one, then check any pop-up dialogue boxes that may occur. To completely uninstall them, follow the on-screen directions, then restart your computer.