How To Fix ‘0x8024200D’ Windows Update Error

In today’s world, Windows 10 is the most widely used operating system. The reason for its popularity is the ease of use and the powerful security it brings along. The regular updates make sure that the system runs well and remains secure.

Since there are a lot of updates coming up with Windows, it sometimes faces errors while updating. One of the most commonly encountered errors is 0x8024200d that pops up while the update goes on.

How to Fix Windows 10 Update Failing with Error 0x8024200D in Windows 10

For those who regularly update their Windows operating system, encountering error codes can be a somewhat common, albeit frustrating, experience. One such error is the notorious 0x8024200D.

This article will delve deep into what this error is, its common causes, its relation to the “finished installing” message, and a potential solution by clearing the Windows Update Cache.

Read Also:

  1. Avast Service High CPU
  2. Plugged in Not Charging
  3. The Audio Service is Not Running

Contents

What is 0x8024200D?

The 0x8024200D error is specific to Windows Update and typically manifests when a user attempts to upgrade their OS, whether from an older version to a newer one or when applying routine cumulative updates.

Causes of 0x8024200D Windows Update Error:

Understanding the causes can aid in troubleshooting. The primary reasons behind the 0x8024200D error include:

  • Corrupted System Files: Damage or corruption to essential system files can impede the update process, triggering the error.
  • Incomplete Previous Updates: If a prior update was interrupted or did not complete successfully, it might block subsequent updates.
  • Software Conflicts: Occasionally, third-party software, especially security tools or antivirus programs, can interfere with the Windows Update process.
  • Corrupted Update Components: Sometimes, the components needed to run the update can become corrupted, leading to the error.

How to Fix Windows 10 Update Failing with Error 0x8024200D in Windows 10

In the following article, we shall be discussing the ways to remove 0x8024200D error and fix it. Now, this error is majorly due to files missing or corrupt files.

Method 1 – Run SFC scan

System file scan is a feature from Windows which helps in locating the missing or corrupt files and replacing them with the right ones. To access this, we need to be in administrator mode. Corrupt files can also cause the Video TDR Failure error.

Step 1: Type start and search for cmd.

Step 2: Right-click on cmd and click on the Run As Administrator.

Step 3: The command prompt window shall open up, type in the following, and hit Enter. The scan shall begin, wait for it to finish up.

C:\Windows\System32>sfc /scannow

The system shall find and repair the corrupt files. Retry installing the update after this.

Method 2 – Delete the Update and Redownload It

We know that the files are corrupt, and it’s difficult in locating the wrong ones. So, we should download the entire update again. To do this, you shall need to boot into safe mode.

Step 1: Hold the Shift key and press the restart button in the Windows start menu. This shall let the trouble-shooter pop up when the system restarts.

Step 2: Select Troubleshoot after booting up. Select advanced, followed by start-up settings. Select restart.

Step 3: Once the system reboots, press the F4 key and select enable safe mode.

Step 4: Go to C:\Windows\SoftwareDistribution\Download, you’ll find the downloaded files in this location. Delete all.

Step 5: Reboot in normal mode. Go to setting, followed by update and security. Select the check for updates option and run the update process again.

You shall be able to have a completely new download after this.

What Does “0x8024200d Finished Installing” Mean?

This message can be somewhat misleading. While it indicates that an installation process reached its conclusion, it doesn’t necessarily mean it was successful.

Instead, the update might have completed its attempt to install, resulting in the 0x8024200D error. It’s essential to differentiate between “finished installing” and “successfully installed.”

Clearing Windows Update Cache to Resolve the Error:

One common and effective solution to address various Windows Update errors, including 0x8024200D, is clearing the Windows Update Cache. Here’s a step-by-step guide:

  1. Open Command Prompt: Start by typing cmd into the Windows search bar. Right-click on Command Prompt and choose “Run as administrator.”
  2. Stop Windows Update Services: Before clearing the cache, you need to stop the Windows Update services. Type in the following commands, pressing Enter after each:
    net stop wuauserv
    net stop cryptSvc
    net stop bits
    net stop msiserver
  3. Clear the Cache: Navigate to C:\Windows\SoftwareDistribution\Download. Delete all the contents inside the “Download” folder. Don’t delete the folder itself, only its contents.
  4. Restart Windows Update Services: Go back to the Command Prompt and type in the following commands:
    net start wuauserv
    net start cryptSvc
    net start bits
    net start msiserver
  5. Reboot Your Computer: After clearing the cache and restarting the services, reboot your computer and try the update again.

Also Read:

  1. Res://aaResources.dll/104
  2. Kmode Exception Not Handled
  3. NVIDIA Installer Cannot Continue
  4. Error Loading Player No Playable Sources Found

Conclusion

From the following article, you can fix the Error Code 0x8024200d, and you will be able to work on Windows smoothly and effectively. The first method will be fast, but in case it doesn’t work for you, go for the second one.

Windows Update errors can be challenging to resolve, given the myriad of potential causes. However, with a clear understanding of the problem and systematic troubleshooting, they become more manageable.

Remember that while clearing the Windows Update Cache can be an effective solution, it’s not a guaranteed fix for all update-related issues. If problems persist, consider consulting with IT professionals or seeking further solutions online.